Building Economics, Cost Planning and Cost in Use - Notes
Public Building Sheets 1 and 2

Worked Examples
3 Apt Detached Bungalow – Probable Cost
5 Apt Detached Bungalow – Probable Cost
4 Apt Detached Bungalow – Probable Cost
4 Shop Units and 4 Houses – Probable Cost
4 Apt House Loch Earn – Probable Cost
5 Apt House Loch Maree

Cost In Use – P A Stone (handwritten copy)
Cost Planning of Buildings – D J Terry (hand and type-written copy)
Building Economics – I Seeley (hand and type written copy)

EXAM PAPERS Part 1 1972 – Construction and Materials Papers A and B 18/5/1972 and 19/5/1972; Structural Design 22/5/1972; Public Health Services 23/5/1972; Land Surveying 24/5/1972; Economics 25/5/1972 and Principles of Law 26/5/1972. (7 Papers)
Exams Part 1 1971 Booklet
EXAM PAPERS Part 2 1973 – Law of Contract 18/5/1973; Environmental and Electrical Services 23/5/1973; Structural Design 24/5/1973; Construction and Materials Papers A and B 25/5/1973 and 28/5/1973; Public Health Services 29/5/1973; Quantity Surveying 30/5/1973 and Economics 31/5/1973. (8 papers)
Exams Part 2 1972 Booklet
EXAM PAPERS Part 3 1974 – Construction and Materials Papers A and B 21/5/1974 and 22/5/1974; Environmental Services 23/5/1974; Accountancy 24/5/1974 am; Specification 24/5/1974 pm; Law for Quantity Surveyors 27/5/1974; Quantity Surveying Papers A and B 28/5/1974 and 29/5/1974; Principles of Valuation 30/5/1974. (9 Papers)
Exams Part 2 1973 Booklet
EXAM PAPERS Part 4 1975 – Computer Studies 22/4/1975; Quantity Surveying Papers A and B 29/5/1975 and 30/5/1975; Economics and Cost Planning 2/6/1975; Professional Practice and Project Management 3/6/1975; Estimating and Price Analysis 4/6/1975; Arbitration and Committee Procedures 6/6/1975. (7 Papers)
Exams Part 4 1974 Booklet

Photocopy of a handwritten Draft Bill of Quantities for various trades, including Preliminaries and Measurements for each trade involved in a construction project to build a structure that includes brick, concrete, cement, and steel reinforcement materials.

Professional standards, guidance, standard forms etc used by Harry Diack in his studies and early career.

Referred to as SMM6. Provides detailed information, classification tables and rules for measuring building works. Its intention is to give a uniform basis for measuring building works in order to facilitate industry wide consistency and benchmarking, to encourage the adoption of best practice and to help avoid disputes. The accompanying Practice Manual provides guidance and good practice on applying the standard in the measurement of building works.

Published by The Royal Institution of Chartered Surveyors, and the National Federation of Building Trades Employers, sixth edition.

Provides standard conditions of contract and forms of tender, agreement and bond to be applied in connection with civil engineering construction works.

Published by The Institution of Civil Engineers, The Association of Consulting Engineers, and The Federation of Civil Engineering Contractors, fifth edition.

Provides a single stage selective tendering procedure for commissioning building works.

Published for the National Joint Consultative Committee for Building by the Royal Institute of British Architects (RIBA).

Provides a standard procedure for how the Bill of Quantities shall be prepared and priced, and how the quantities of work will be expressed and measured.

Published by the Institution of Civil Engineers.

Provides a standard procedure for how the Bill of Quantities shall be prepared and priced, and how the quantities of work will be expressed and measured.

Published by the Institution of Civil Engineers, reprinted 1974.

Handbook looking at the application of discounting to the decision process in building, and the techniques of Cost-In-Use, Private Investment Appraisal, and Cost benefit Analysis and how and when they are applied.

Published by the Ministry of Public Building and Works.

Referred to as SMM5. Provides detailed information, classification tables and rules for measuring building works. Its intention is to give a uniform basis for measuring building works in order to facilitate industry wide consistency and benchmarking, to encourage the adoption of best practice and to help avoid disputes.

Published by The Royal Institution of Chartered Surveyors, and the National Federation of Building Trades Employers, sixth edition.

This standard was used throughout the duration of Harry Diack's Quantity Surveying course at the Dundee College of Technology.