Provides a standard procedure for how the Bill of Quantities shall be prepared and priced, and how the quantities of work will be expressed and measured.

Published by the Institution of Civil Engineers.

Provides a standard procedure for how the Bill of Quantities shall be prepared and priced, and how the quantities of work will be expressed and measured.

Published by the Institution of Civil Engineers, reprinted 1974.

Handbook looking at the application of discounting to the decision process in building, and the techniques of Cost-In-Use, Private Investment Appraisal, and Cost benefit Analysis and how and when they are applied.

Published by the Ministry of Public Building and Works.

Referred to as SMM5. Provides detailed information, classification tables and rules for measuring building works. Its intention is to give a uniform basis for measuring building works in order to facilitate industry wide consistency and benchmarking, to encourage the adoption of best practice and to help avoid disputes.

Published by The Royal Institution of Chartered Surveyors, and the National Federation of Building Trades Employers, sixth edition.

This standard was used throughout the duration of Harry Diack's Quantity Surveying course at the Dundee College of Technology.

Provides standard conditions of contract and forms of tender, agreement and bond to be applied in connection with civil engineering construction works.

Published by The Institution of Civil Engineers, The Association of Consulting Engineers, and The Federation of Civil Engineering Contractors, fourth edition (amended).

Provides general conditions to be applied to all UK Government contracts for building and civil engineering works.

Published by Her Majesty's Stationery Office (HMSO), second edition.

Bulleting demonstrating how cost information obtained on previous projects can be applied in current work during the design and planning design stages to help in cost analysis and cost planning.

Published by the Department of Education and Science, third edition.

Provides layouts of sample operational bills, and annotations on points of interest.

Written by E. R. Skoyles, ARICS, AIQS, and published by the Building Research Station, Ministry of Technology.

Worked Examples (format is Drawing No; Drawing Title; Model (all references in brackets are to the Standard Method of Measurement of Building Works Edition 5 (SMM) Sections)

43 Boundary Wall (D,F,G,
44 Banda Drawing Lead Flat Roofing, Zinc Roofing, Copper covered flat roof, Copper covered flat roof with standing seems (M).
45 Lead flat Roof with Sloping upstand (M)
46 Lead Flat Roof with Box Gutter (M)
47 Copper Hipped Roof (M)
48 Parapet Gutter in Lead (M)
49 a and b Plumbing (S)
50 Stone Dressings (K)
51 Window Openings (G,F,K)
52 Stone Work (K)
No number Hot Water Installation (S)
1 Basement Excavations / Underpinning (D,H,G) (Civils)
2 Retaining Wall (D,F,J,G,K) (Civils)
3 Chimney Shaft (D,G,F,
4 Precast Concrete Piling / Concrete Building RICS Final Exam 1963 (E,F
5 Entrance Door (F)
6 Concrete Balcony (F)
7 Loading Bay (F)
8 Concrete Stair (F)
9 Reinforced Concrete Building (F)
10 Structural Steel Work Sheet 1 (Q)
11 Structural Steel Work Sheet 2 (Q)
12 Structural Steel Work (Q)

Worked Examples (format is Drawing No; Drawing Title; Model (all references in brackets are to the Standard Method of Measurement of Building Works Edition 5 (SMM) Sections)

13 Oriel Window (K)
14 Stone Work in Ashlar with semi- circular Arch (K)
15 Stone Work (G,K)
16 Stone Work – Glasgow High School (K)
17 Stone Work Panels and Pillasters (K)
18 Cupboard below Fume Cupboard (N,P)
19 Details for above 18 (N,P)
20 Details for above 18 (N,P)
21 Timber Curtain Walling Details (P)
22 Timber Curtain Walling Details (P)
23 Trusses to Octagonal Roof (N)
24 Trusses to Octagonal Roof (N)
25 Stairway (P)
26 Timber Screen (N,P)
27 Stone Tracery Cottingham Church (K,Y)
28 Panelling (N,P
29 Panelling
30 Panelling
31 Panelling
32 Panelling Details (P
33 Panelling Details
34 Marble Catafalque (U)
35 Mansard Roof (M)
36 Mansard Roof – Copper Roof Details
37 Alteration Works (C)
38 Demolitions and Alterations (C)
39 Forming Window Openings (C,K)
40 – 48 incl Plumbing (S)
No number Boundary Wall - Civil Engineering (Civils)
No number Carriageway – Civil Engineering (Civils)